Amazon Smart Thermostat – Save money and energy – Works with Alexa and Ring – C-wire required

I’ve been holding off on buying this thermostat for quite some time based on reviews and even considered other pricier brands for the same reason but I finally decided to give it a try because I’m sick of having to go over to the thermostat and manually adjust it (first world problem right?)I am so pleased with my decision that immediately after installing it, I bought a second on for upstairs.Installation was easy and took about 15-20 minutes to install and set up in the app. The unit mounts with 3 screws and anchors, a small screwdriver tool and an optional wall plate. A word of advice – use a better screwdriver because the included tool isn’t great. You’ll also need a drill with a 3/8” bit to assist with the wall anchors.Some of the reviews I read mentioned that people had trouble with the app recognizing two thermostats, that was not the case at all with me. It was extremely easy to differentiate in the app and just as easy to control each one.Another review that made me worry about buying this thermostat was that you couldn’t simply tell your Alexa device to adjust the temperature, and that you had to open the app to make adjustments. This problem must have been resolved or a solitary issue because ours works just fine with voice commands.This thermostat does not offer a sensor option to monitor a particular room or area, so if you’re looking for that, you may need to look at other options.As far as smart settings, you have two options. Alexa can learn your routines and track your phone’s location to adjust the temperatures accordingly when you’re home or away. This works best when everyone in the household connects to the app and consents to tracking. It will even adjust the temperature to your desired settings when you’re within a certain range of your home.If this option isn’t for you, it will allow you to set schedules and desired temperature ranges throughout each day of the week. But you’re still able to log into the app and make adjustments when needed.My last tidbit of information is regarding the second unit that I bought, it was a “renewed unit” and priced at $40. It’s absolutely perfect and I couldn’t tell the difference between it and the new one, it came with all new mounting hardware and was just as easy to install as the first one that I bought.

I’m a big Nest fan had it on my old house the problem that I have with them it’s the cost, and even with gas company great rebate didn’t justify the cost especially with my new home having a total of 5 thermostats (t-stat). I was excited when I found that Amazon partner with Honeywell to get this t-stat created as Honeywell has been creating t-stat for years which make me feel better when making the purchase.—COST—Now let go over the details for cost it’s good and I got two of them which at the end of the day will be free due to the electric company rebate for a smart t-stat. I didn’t get a C- adapter and I will explain later (INSTALL session) why I purchase a 24-volt transformer for my first-floor unit.—INSTALL—Love the package it reminds me of the NEST when it first starts came with everything that you needed the only additional tools, I need was a harmer, and drill but this is normal for these installations.Now the biggest question that everyone has is the C (common) wire. This is where you need to do your research regardless of what company you go with when upgrading to a smart thermostat, due your homework on what you need. For me I have a spill unit (boiler & A/C) first for my second-floor unit it was super easy I had an extra wire and I use it for Common the t-stat startup and finish within 30 min. Now for my first floor I utilize a 24-volt transformer because I didn’t have spare cables and I didn’t want to run a new cable which drove me to make the purchase again do your homework before and see what option best works for your use case.I connected the transformer to the C wire and the other end to Rc and that works like a champ. This is critical if you have a split unit since Honeywell power their t-stat via Rc only when you have two RED Wire (R (heater) and Rc(cooling)) and the blue tab (internal jumper is down position. If you only have one RED Wire you are fine just keep the blue tab up and your t-stat will turn on without any problems. I did reach out to Honeywell and explain to them they need to explain this on their site and white papers that when you have split units’ power for the t-stat will come from Rc and not from R this is critical because my house previous owner installed a switch to keep the A/C unit down through the winter to avoid accident turning on the unit which is great idea. Please keep in mind this is NOT an Amazon problem that is Honeywell they did acknowledge their mistake and agree to update their site and documentation.Running my transformer cable and installing the unit took me about 60 minutes because I wanted to look perfect with the transformer cable going through the wall this make the installation look cleaner.—-SETUP—-Once all wire were connected the setup of the t-stat was simply and when I say simple it was super didn’t have input the WiFi password or anything else since it automatic joined my account that was amazing and simply just like setting a fire table that was a great experience. Amazon did an amazing job doing this some users this my not be as good, but I look automation the less click I must do the less chances of mistake A+—LOOK—The t-stat looks great after the final install the wall panel (included but optional for install) made it easier for me since I didn’t have to paint (if you had a different color paint I would recommend adjusting before completing the install but that is just me)—Interface (GUI)—-For me the GUI is great for some it my but I’m one of those people that like to have one application on my phone or tablet rather than 2 and this is where Amazon did another amazing job. Please keep in mind that Google who purchase NEST is doing the same thing I see the NEST application going away in the future all new NEST is configure from Google Home and they also did a great job The GUI it’s simple and allows you to setup multiple schedules and copy them to different days or week. Huge plus on my book because for the NEST I had to do manually per day I can setup one day and copy to another. You can setup away and home schedule or utilize your current Amazon device to tell the t-stat that you are home or away. Another item that I love from the Amazon you can setup MAX cooling or heating this allows for mistake not to happen and getting your house too hot or cool really go option to have and you can set filter replacements without your assistance (optional) for me this is great no more remembering air filter as they will show up at my footsteps.Energy saving incentives can also be done via the application. The dashboard its great too it tells you how much energy you utilize each day and where you can save.Now the only downside for that I experience is only scheduling session on Android because it forces close my Alexa application all the time, I don’t have this problem with anything else on the application just the scheduling session. This option works perfect on my wife new iPhone and iPad pro and new Android phone. My old Android is the one with this problem, but I experience this kind of thing on and off since it’s an older device.——-Final judgment —-The device is good option for a smart t-stat and would recommend for anyone some of the problems that were reported it was on day one which is expected with any new launch overall I see this t-stat giving Google (NEST) and others a run for their money as now you have a great option for smart t-stat and you don’t require to break your budget to acquire one. In addition, love the one application for everything as previously mentioned all big companies are doing this model to stop the install of some many other applications. In a scale from 0 -10 this t-stat gets a 9 please note that the NEST 3rd gen got a 9 from me. Hope this helps everyone make the correct decision and I will update this review in a few weeks to report back.

I find the price very competitive and much better than those overpriced similar products that do not offer anything more than this Amazon Smart Thermostat.I like it’s sleek and classy look. It also comes with faceplate while other brands don’t ! And installs very easily, and very eye catching after installatin. Being native to Alexa makes it more comfortable to use. In case of rebates, it is one of the products approved for rebates by energy providers as well.I also like the ease of scheduling the heating and cooling! On my non-smart honeywell thermostat, I never got the time or patience to schedule that and for the last 7 years , each time I said later, when I read the manual! And that never happened, but right after installing this, took me 10 seconds to accomplish that.Highly recommend this product.

We had a standard older digital thermostat that needed upgrading and this Amazon digital thermostat is perfect! So easy to install, the Alexa app walks you through each step very carefully and with video so it’s very clear. It took me about 45-60 minutes and the setup was about 5 minutes after turning the power back on. Through the app you can set daily routine schedules, manual settings or a feature called Habits which read the daily habits within a certain setting parameter and adjust accordingly. Overall I’m very happy with this purchase and would recommend 100% to anyone looking for an affordable yet very high tech thermostat replacement.

Was looking to have remote access to home temperature status and thermostat setting, voice control, and detection of my presence to adjust the thermostat setting during the day. It did accomplish the first two. Still learning after one week how to control temperatures by hunches; may revert to using a schedule. I have a heat-only system.The installation ultimately required a powered C adapter separate from the furnace controller. My furnace controller has no wiring point labeled C (for common); perhaps it is labeled something else. I bought the Honeywell C-wire adapter that is offered alongside this thermostat, just in case, but without a C connection on the furnace control I gave up on that adapter. What did work was a different kind of C wire adapter plugged into a wall outlet near the thermostat. The two wires from that are connected to the C and RC connection points of the thermostat, and the W and R wires from my furnace controller are connected to W and R of the thermostat. Bingo!I am trying Alexa “hunches” for presence detection but that is not working yet. When I am not home during the day, such as at work — indicated by my cell phone not being connected to home wifi PERHAPS — I would like the thermostat to be at 62F and when I am home I would like to have it at 68F. That is how I thought I configured it, but the 68F setting persists long after I have left for work. The problem must be in how the algorithm in Alexa decides whether or not I am home. It seems to change from 62 at night to 68 in morning adequately. Not sure yet if it changes from 68 to 62 at night consistently or how its hunches work for that. Manual overrides via the phone app work fine, including from work. A work in progress.